Diamond wet and dry core drilling unit with soft impact DSE 200 2500 W

Model: DSE 200

Description:
Diamond wet and dry core drilling unit with soft impact DSE 200 2500 W

Equipped:
Drill Motor ESD 200 (0352W000) with connection for dust extraction and water supply, single-jaw wrench SW 32 und SW 41 plus drill stand BST 250 (09631000) each in a carton box

Use:
– Dry and wet drilling up to Ø 250 mm in particularly hard materials, e.g. reinforced concrete, highly compacted sand-lime brick and masonry at high working speeds – Making wall and ceiling openings in plumbing, heating and ventilation construction

Features:
With switchable soft impact for powerful dry drilling of reinforced concrete and wet drilling in one device Dry drilling in particularly hard materials, e.g. reinforced concrete, highly compacted sand-lime brick and masonry at high working speeds Perfect problem solver for drillings where the on-site conditions do not allow wet drilling (hollow ceilings etc. / prevention of water damage) Newly developed IHT-gears with high-precision toothed ring geometry – extremely robust thanks to the Impact Hybrid Technology (IHT), which enables an optimized, high-frequency impact impulse output to the drill bit for a faster drilling progress Hand and rig-guided drilling of wall and ceiling openings in sanitary, heating and ventilation construction EDMC Pro – digital motor control with service and overload indicator, soft start, over current cut-off Efficient dust extraction of health hazardous mineral dusts Optimal results with EIBENSTOCK IHT soft percussion drill bits for steel-reinforced concret Mechanical safety clutch Electronic overload protection

Technical specifications:
Power input:2,500 W Rated voltage:230 V Stroke rate:10,000 / 21,000 bpm Stroke:600 mm Rated speed:500 / 1,050 rpm No-load speed:750 / 1,500 rpm Spindle connection: 1 ¼ “ male UNC Drilling diameter: 51-250 mm (opt. 202 mm) Machine connection: Universal tool holder Column length: 995 mm Weight: 24.5 kg