Diamond core drilling motor ESD 200

Model: ESD 200

Description:
Diamond core drilling motor ESD 200

Equipped:
Drill Motor ESD 200with connection for dust extraction and water supply, single-jaw wrench SW 32 and SW 41 in a carton box

Use:
– Dry and wet drilling up to Ø 250 mm in particularly hard materials, e.g. reinforced concrete, highly compacted sand-lime brick and masonry at high working speeds
– Making wall and ceiling openings in plumbing, heating and ventilation construction

Features:
With switchable soft impact for powerful dry drilling of reinforced concrete and wet drilling in one device
Dry drilling in particularly hard materials, e.g. reinforced concrete, highly compacted sand-lime brick and masonry at high working speeds
Perfect problem solver for drillings where the on-site conditions do not allow wet drilling (hollow ceilings etc. / prevention of water damage)
Newly developed IHT-gears with high-precision toothed ring geometry – extremely robust thanks to the Impact Hybrid Technology (IHT), which enables an optimized, high-frequency impact impulse output to the drill bit for a faster drilling progress
Hand and rig-guided drilling of wall and ceiling openings in sanitary, heating and ventilation construction
EDMC Pro – digital motor control with service and overload indicator, soft start, over current cut-off
Efficient dust extraction of health hazardous mineral dusts
Optimal results with EIBENSTOCK IHT soft percussion drill bits for steel-reinforced concret
Mechanical safety clutch
Electronic overload protection

Technical specifications:
Power input: 2,500 W
Rated voltage: 230 V
Stroke rate: 10,000 / 22,000 bpm
Rated speed: 500 / 1,050 rpm
No-load speed: 750 / 1,500 rpm
Spindle connection: 1 ¼ “ UNC male
Drilling diameter: 51-250 mm (opt. 202 mm)
Machine connection: Universal tool holder
Weight: 8.9 kg